BAL / ADNIK QUICK-TO-GROUND M-H LEVELER
| Item | Part # | MFR # | Description |
|---|---|---|---|
| 1 | P265501 | Trailer Stabilizer Jack Stand Connecting Channel; Connects Two Scissor Jacks When No Crossmember Mount Is Available; 50 Inch Length; Black | |
| 2 | 857066 | BOLT, HEX HEAD 3/8-16 X 3" | |
| 3 | 857024 | ARM, UPPER FOR 24" JACK | |
| 4 | 93-8502 | 857086 | TRAILER JACK ACCESSORIES; B.A.L. Drive Screw |
| 5 | 857061 | DRIVE TRUNION | |
| 6 | 857064 | PLASTIC SPACER BUSHING | |
| 7 | 857026 | ARM, LOWER FOR 24" JACK | |
| 8 | 857028 | PAD, BASE | |
| 9 | 1014 | 3/8-16 NYLON LOCKING NUT | |
| 10 | 857065 | BOLT, HEX HEAD 3/8-16 X 2 3/4" | |
| 11 | 2112 | 5/8 X 1 X 3/16 WASHER | |
| 12 | 857060 | STATIONARY TRUNION | |
| 13 | 94-9560 | 857062 | TRAILER JACK ACCESSORIES; Bal Thrust Bearing |
| 13 | 2111 | THRUST WASHER ASSY. (MODEL 24009) | |
| 13 | 857083 | THRUST WASHER ASSY. (MODEL 24009) | |
| 14 | 94-9225 | 857076 | Trailer Stabilizer Jack Stand Drive Rod Pin; Use With Adnik C Channel Drive Rods; Hair Pin Type |
| 15 | 857067 | WASHER, SPACER/BEARING | |
| 16 | 857075 | O-RING BRAKE | |
| 17 | 15-0273 | 20037 | Trailer Stabilizer Jack Stand Crank; For BAL Deluxe Scissor Jack 24002D/24003D; Zinc Plated Steel |
| 999 | P858111 | NUT PLATE | |
| 999 | P265504 | HARDWARE PACK |
Reading this list
Item is the callout number printed on the exploded diagram for EXPLODED VIEW — match it to the drawing rather than to the description, which is often abbreviated on the manufacturer's sheet. Of the 21 parts here, 4 carry a distributor number you can order against directly, and 17 are manufacturer-number only — those you'll be sourcing through the brand or a dealer.
1 row carries a supersession or substitution note. Read those before ordering — a listed substitute is not always a like-for-like swap, and on control boards in particular it can change how the unit behaves.
More jacks & leveling breakdowns: 30 models in this category →